Stainless Steel Woven Wire A3 Sheets

The Mesh Co. Store | A3, A4 and A5 Sheets | Stainless Steel Woven Wire | Stainless Steel Woven Wire A3 Sheets

High Quality Stainless Steel Mesh In A Size That Everyone Is Familiar With

A3 is the largest of the three standard sizes that we offer our materials in. Woven Wire Mesh is ideal as an A3 sheet if you are a model maker or sculptor.

This material will arrive inside a small cardboard tube with the exception of #2 - #8 which is too heavy to roll up to an appropriate size. These heavy materials will be dispatched flat in a secure package.

A3 sheets are double the size of their A4 alternatives but they are available here for less than double the price. As with the A5 and A4 sheets the products if you but two you will get a third absolutely Free. So grab yourself a bargain!!

#2 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS2-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is most suited to engineering and hard working applications. It will last for, assuming it is under fair conditions, many years.

Mesh Count: #2 mesh - 2 wires or holes per linear inch.
Wire Diameter: 2mm
Aperture: 10.7mm - this is the hole size and it is square
Open Area: 71%

The wires on this material are thick and it can only be cut with especially heavy tin snips. We can cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#5 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS5-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is most suited to engineering and hard working applications. It will last for, assuming it is under fair conditions, many years.

Mesh Count: #5 mesh - 5 wires or holes per linear inch.
Wire Diameter: 1.2mm
Aperture: 3.88mm - this is the hole size and it is square
Open Area: 58.3%

The wires on this material are thick and it can only be cut with especially heavy tin snips. We can cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#5 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS5A-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is most suited to engineering and hard working applications. It will last for, assuming it is under fair conditions, many years.

Mesh Count: #5 mesh - 5 wires or holes per linear inch.
Wire Diameter: 1mm
Aperture: 4.08mm - this is the hole size and it is square
Open Area %: 64.5%

The wires on this material are thick and it can only be cut with especially heavy tin snips. We can cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

People who bought this item also bought:

1. #8 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS8-A3)

#8 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS8-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is well suited to engineering and hard working applications. It is a popular material for scuplture as it is malleable and strong in equal measure. It is also the mesh size that is used at the base of artificial bee hives.

Mesh Count: #8 mesh - 8 wires or holes per linear inch.
Wire Diameter: 0.9mm
Aperture: 2.275mm - this is the hole size and it is square
Open Area %: 51.3%

The wires on this material are thick and it can easily be cut with heavy tin snips. Regular tin snips may also be used but would require a little more effort than it would if you used the afore mentioned heavy variety. We can cut this simply on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

People who bought this item also bought:

1. #5 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS5A-A3)

2. #50 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS50-A3)

#10 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS10-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is well suited to engineering and hard working applications. It is at the coarser end of the heavy duty bracket and it is a great material for sculpture and model making. As it is Stainless Steel it will last, assuming is is appropriate conditions, for many years.

Mesh Count: #10 mesh - 10 wires or holes per linear inch.
Wire Diameter: 0.56mm
Aperture: 1.98mm - this is the hole size and it is square
Open Area %: 60.8%

The wires on this material are thick and it can easily be cut with heavy tin snips. Regular tin snips may also be used but would require a little more effort than it would if you used the afore mentioned heavy variety. We can cut this simply on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#10 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS10A-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is well suited to engineering and hard working applications. It is at the coarser end of the heavy duty bracket and it is a great material for sculpture and model making. As it is Stainless Steel it will last, assuming is is appropriate conditions, for many years.

Mesh Count: #10 mesh - 10 wires or holes per linear inch.
Wire Diameter: 0.9mm
Aperture: 1.64mm - this is the hole size and it is square
Open Area %: 42%

The wires on this material are thick and it can easily be cut with heavy tin snips. Regular tin snips may also be used but would require a little more effort than it would if you used the afore mentioned heavy variety. We can cut this simply on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

People who bought this item also bought:

1. #50 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS50-A3)

2. #34 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS34-A3)

#10 x #9 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS10x9-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is heavy duty and is well suited to engineering and hard working applications. It is at the coarser end of the heavy duty bracket and it is a great material for sculpture and model making. As it is Stainless Steel it will last, assuming is is appropriate conditions, for many years.

Mesh Count: #10 x #9 mesh - This mesh has rectangular holes - 10 holes per linear inch in one dimension and 9 in the other dimension.
A4 pieces may be cut in either direction so it is not possible to say whether the hole will lie across or along the longest dimension.
Wire Diameter: 0.56mm
Aperture: mm - this is the hole size and it is square
Open Area %: %

The wires on this material are thick and it can easily be cut with heavy tin snips. Regular tin snips may also be used but would require a little more effort than it would if you used the afore mentioned heavy variety. We can cut this simply on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#20 Stainless Steel Woven Wire - A3 Sheets
Ref: WSS20-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is coarse and is well suited to both craft and filtration applications. It is highly malleable and is a great material for sculpture and model making.

Mesh Count: #20 mesh - 20 wires or holes per linear inch.
Wire Diameter: 0.355mm
Aperture: 0.915mm - this is the hole size and it is square
Open Area %: 51.9%

The wires on this material are easy to cut with both regular and heavy tin snips and it is also cuttable using domestic scissors. We can also cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

People who bought this item also bought:

1. #50 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS50-A3)

2. #34 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS34-A3)

#28 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS28-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is coarse and is well suited to both craft and filtration applications. It is highly malleable and is a great material for sculpture and model making.

Mesh Count: #28 mesh - 28 wires or holes per linear inch.
Wire Diameter: 0.355mm
Aperture: 0.552mm - this is the hole size and it is square
Open Area %: 37%

The wires on this material are easy to cut with both regular and heavy tin snips and it is also cuttable using domestic scissors. We can also cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#30 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS30-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is coarse and is well suited to both craft and filtration applications. It is highly malleable and is a great material for sculpture and model making.

Mesh Count: #30 mesh - 30 wires or holes per linear inch.
Wire Diameter: 0.20mm
Aperture: mm - this is the hole size and it is square
Open Area %: %

The wires on this material are easy to cut with both regular and heavy tin snips and it is also cuttable using domestic scissors. We can also cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#34 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS34-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is coarse and is well suited to both craft and filtration applications. It is highly malleable and is a great material for sculpture and model making.

Mesh Count: #34 mesh - 34 wires or holes per linear inch.
Wire Diameter: 0.25mm
Aperture: 0.497mm - this is the hole size and it is square
Open Area %: 44.3%

The wires on this material are easy to cut with both regular and heavy tin snips and it is also cuttable using domestic scissors. We can also cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

People who bought this item also bought:

1. #50 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS50-A3)

2. #20 Stainless Steel Woven Wire - A3 Sheets (Ref: WSS20-A3)

#40 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS40-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is coarse and is well suited to both craft and filtration applications. It is highly malleable and is a great material for sculpture and model making.

Mesh Count: #40 mesh - 40 wires or holes per linear inch.
Wire Diameter: 0.224mm
Aperture: 0.411mm - this is the hole size and it is square
Open Area %: 41.9%

The wires on this material are easy to cut with both regular and heavy tin snips and it is also cuttable using domestic scissors. We can also cut this easily on our guillotine so please contact us with any specific size that you may have. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#50 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS50-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #50 mesh - 50 wires or holes per linear inch
Wire Diameter: 0.200mm
Aperture: 0.308mm - this is the hole size and it is square
Open Area %: 36.8%

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

People who bought this item also bought:

1. #8 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS8-A3)

2. #34 Stainless Steel Woven Wire - A3 Sheet (Ref: WSS34-A3)

#60 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS60-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #60 mesh - 60 wires or holes per linear inch.
Wire Diameter: 0.16mm
Aperture: 0.263mm - this is the hole size and it is square
Open Area %: 38.7%

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#70 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS70-A3
An A4 (210mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #70 mesh - 70 wires or holes per linear inch.
Wire Diameter: 0.16mm
Aperture: 0.203mm - this is the hole size and it is square
Open Area %: 31.3%

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#70 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS70A-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #70 mesh - 70 wires or holes per linear inch.
Wire Diameter: 0.76mm
Aperture: mm - this is the hole size and it is square
Open Area %: %

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#80 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS80-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #80 mesh - 80 wires or holes per linear inch.
Wire Diameter: 0.14mm
Aperture: 0.178mm - this is the hole size and it is square
Open Area %: 31%

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#80 Magnetic Stainless Steel Woven Wire - A3 Sheet
Ref: WSS80A-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #80 mesh - 80 wires or holes per linear inch.
Wire Diameter: 0.05mm
Aperture: 0.268mm - this is the hole size and it is square
Open Area %: %

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#84 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS84-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a medium sized mesh and is well suited to both craft and filtration applications. It is highly user friendly and adaptable and this size is where mesh starts to take on the properties that you can see in fine mesh.

Mesh Count: #84 mesh - 84 wires or holes per linear inch.
Wire Diameter: 0.063mm
Aperture: mm - this is the hole size and it is square
Open Area %: %

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#100 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS100-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a fine mesh and is well suited to both craft and filtration applications (very fine filtration for that matter). On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #100 mesh - 100 wires or holes per linear inch.
Wire Diameter: 0.112mm
Aperture: 0.142mm - this is the hole size and it is square
Open Area %: 31.3%

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#100 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS100A-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a fine mesh and is well suited to both craft and filtration applications (very fine filtration for that matter). On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #100 mesh - 100 wires or holes per linear inch.
Wire Diameter: 0.056mm
Aperture: mm - this is the hole size and it is square
Open Area %: %

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#120 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS120-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a fine mesh and is well suited to both craft and filtration applications (very fine filtration for that matter). On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #120 mesh - 120 wires or holes per linear inch.
Wire Diameter: 0.09mm
Aperture!: 0.122mm - this is the hole size and it is square
Open Area %: 33%

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#130 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS130-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a fine mesh and is well suited to both craft and filtration applications (very fine filtration for that matter). On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #130 mesh - 130 wires or holes per linear inch.
Wire Diameter: 0.043mm
Aperture: mm - this is the hole size and it is square
Open Area %: %

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#140 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS140-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as a fine mesh and is well suited to both craft and filtration applications (very fine filtration for that matter). On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #140 mesh - 140 wires or holes per linear inch.
Wire Diameter: 0.08mm
Aperture: 0.101mm - this is the hole size and it is square
Open Area %: %

The wires on this material are fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#150 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS150-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as an ultra fine mesh and is well suited to delicate craft applications. On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #150 mesh - 150 wires or holes per linear inch.
Wire Diameter: 0.063mm
Aperture: 0.106mm - this is the hole size and it is square
Open Area %: 39.4%

The wires on this material are extraordinarily fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#165 Stainless Steel Woven Wire - A3 Sheet
Ref: WSS165-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as an ultra fine mesh and is well suited to delicate craft applications. On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #165 mesh - 165 wires or holes per linear inch.
Wire Diameter: 0.05mm
Aperture: 0.104mm - this is the hole size and it is square
Open Area %: 45.6%

The wires on this material are extraordinarily fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

#200 Stainless Steel Woven Wire - A3
Ref: WSS200-A3
An A3 (420mm x 297mm) sized sheet of Stainless Steel woven mesh.

This material is what we would refer to as an ultra fine mesh and is well suited to delicate craft applications. On first glance you would not realise that it is mesh at all and it is a brilliant material for adding a unique touch to fashion and sculpture designs.

Mesh Count: #200 mesh - 200 wires or holes per linear inch.
Wire Diameter: 0.05mm
Aperture: 0.077mm - this is the hole size and it is square
Open Area %: 36.8%

The wires on this material are extraordinarily fine and can be cut using anything from kitchen scissors upwards. This material is also available in Pre-Cut A4 Sheets if that is closer to the size that you may need.

Price: £8.99

Buy 2 A3 Sheets and Get A Third Absolutely Free!!
Quantity:

The Mesh Co. Store | A3, A4 and A5 Sheets | Stainless Steel Woven Wire | Stainless Steel Woven Wire A3 Sheets

Our Product Range

Information Pages

Best Sellers

New Products

Stainless Steel Woven Wire A3 Sheets

High Quality Stainless Steel Mesh In A Size That Everyone Is Familiar With

Your Cart